-
-
Airlift Bumper Heavy Duty Center Bracket Set
Heavy Duty Air lift bumper Center Bracket set. These are the hard to find center airlift bumper brackets. We have beefed these up and made them even stronger 3/16 thick.Price range: $149.99 through $194.99 -
-
-
Armored Window Wiper Motor Relocation Bracket
This bracket is needed when installing the ibis tech kick out armored windshield kit.$145.00- Comes in raw steel
-
-
-
Black Dog Alignment tool
We designed this tool and use it in our Black Dog shop. Make aligning your HMMWV®/humvee® easy! Simply bolt our tool on aposing spindles, place a tape measure in the slots on each side of the tool and adjust the toe till the measurement matches. These tools are sold in raw metal finish. Accept no substitutes!$129.95 -
Black Dog Cell Phone Holder
Keep your phone secure and accessible, even in rugged conditions. This all-aluminum cell phone holder is specifically designed for military Humvees to match the look of the factory radio mounts for a seamless fit. The adjustable grip expands from 3" to 4 ¼" to accommodate a wide range of smartphones. A convenient cutout at the base allows charging while mounted, so you’ll never be left without power in the field. Durable, functional, and purpose-built for your Humvee. Proudly made in the USA. Features: • Designed to simulate factory Humvee DAGR radio mount style • Raw aluminum with media blasted finish, ready for paint • Adjustable grip: fits phones 3"–4 ¼" wide • Clearance at the base for charging cable access • Includes hardware and detailed instructions • Durable and rugged design for military vehicles$65.00 -
Black Dog Customs M1165 Turbo Build
Starting @ US$ 77,500
This is the ultimate Humvee! It is the type of Humvee that separates the boys from the MEN! Black Dog Customs has a stellar reputation for building Humvees the right way. Don't miss out on this mean machine! Check out the impressive list of features:
Includes:-
- 2006 factory 1165 turbo diesel
- 6.5 Turbo Diesel Full Factory Set-Up
- 4-speed 4L80e transmission,
- 242 Transfer Case
- Factory TCM and Body Harness
- Full 12K suspension and frame
- Under 2000 miles
- Full 1165 turbo diesel drive train
- Factory 1165 air-conditioning
- Full OEM M1165 roof set up
- Rear window in the rear wall
- Full turret kit for the roof
- Full electric turret
- OEM Coupla for the Turret
- OEM Gun shield
- Dummy M60 and Mount
- Full OEM EVC Hood and Grill Set Up with Frame Extensions
- OEM Supplemental Armor Doors
- Airlift Bumper
- LED Tail and Turn Lights with LED Flash Module
- Wet Sounds Stereo
- Black Dog Tire Carrier
- Radio Tray with Cup Holders
- Fuel Cut Off Switch
- Auto Light Switch
- Good Year MTR Tires on 24bolt rims
- A2 Brakes with 12-inch Rotors
- Full Inspection
- Full Degrease and Pressure Wash
- Engine to be Thoroughly Inspected
- Inspected Gauge Cluster and Replaced any Non-Functioning Gauges
- New Wellman Glow Plugs
- Installation of an Additional Grounding Harness
- 2 New Napa 6TL Batteries
- Fuel Filter Replaced
- Fuel Filter Relocated
- New Air Filter
- New Oil Filter and Oil Change
- Transmission and Transfer Case Fluid Change
- Inspected and Change the Fluid in Differentials
- Inspected Portal hubs for Leaks and Repaired if Necessary
- Inspected Spindle Nuts and Lock Washers
- Changed Fluid in Portal Hubs
- Ran Diagnostics on the 4l80 Transmission and Repaired if Necessary
- Inspected all Suspension Components and Replaced Any Worn Components
- Inspected Ball joints, Tie Rod Ends, Pitman Arm and Idler arm, Replaced If Worn
- Inspected and Repaired/Replaced Generator and Voltage Regulator
- Pressure Tested the Cooling System
- Inspected the Hydraulic Fan Clutch System Replace Any Components That May be Faulty
- Replaced all Preform Hoses on the Engine
- Replaced Non-Preform Hoses as Needed
- Replaced all Fuel Return Lines if Needed
- Flushed the Fuel Tank and System
- New Fuel Collar
- Fording Set Up, Less the Snorkel and Tailpipe
- New Windshield wipers
- New OEM Insulation and Floor Mats
- 5/8 Thick Rubber Tunnel Mat
- Checked Wiper Fluid Reservoir and Replace in Necessary
- New Hood Bumpers
- New LED Dash Lights
- High Back Seats in the Front and the Back
- New Authentic CARC Paint: 383 Green
- LED Headlights OEM Heated truck lite LED headlights
- Tag holders
- Clear State of Georgia title
Contact us at (770) 262-0214 for more information!
-
-
Sold out
-
-
Corbeau Seat Adaptor
Upgrade your Humvee seating without losing factory alignment. Bolt your Corbeau seats directly into your Humvee with this adaptor. Designed to match the OEM high-back seat location, it ensures proper height, alignment, and secure installation. Built tough for long-term reliability in field conditions. Proudly made in the USA. Features: • Fits Corbeau seats with direct bolt-on design • Aligns with OEM high-back seat location • Strong construction for long-term use • Ensures secure seating with proper height and alignment • Powder coated black • Includes seat adaptors for one seat, hardware and instructions$165.00 -
-
-
-
-
Drivers Side Wedge Seat Adaptor
This adjustable adaptor fits the driver’s side seat mount for select first gen trucks with adjustable base, Humvee A2 models and newer Turbo models. Universal design will fit OEM factory high back seats, Corbeau seats and many others. Simple installation for aftermarket seating. Proudly made in the USA. Features: • Adjustable for optimal seat positioning • Universal fit for OEM factory high back seats and Corbeau seats • Heavy-duty steel construction • Ensures secure, stable installation • Powder coated black$165.00 -
-
-
Flange Nut & Adapter Set — Overrunning Clutch Adapter for 200A / 400A Generators
Flange Nut & Adapter Set — Overrunning Clutch Adapter for 200A / 400A Generators | 4140 Chrome‑Moly, Gold Zinc Chromate — OEM Plus High‑strength replacement adapter and flange nut for mounting the overrunning clutch pulley on 200 amp / 400 amp generators. Machined from 4140 chrome‑moly steel and gold zinc chromate plated for superior durability and corrosion resistance. Direct-fit OEM plus quality. Key features$165.00- Complete set: adapter + flange nut — everything needed to mount overrunning clutch pulley.
- Direct fit for 200A / 400A generator overrunning clutch assemblies.
- Premium material: precision machined from 4140 chrome‑moly steel for exceptional strength and wear resistance.
- Protective finish: gold zinc chromate plating for corrosion protection and long service life.
- OEM Plus quality: higher spec than original equipment for improved reliability.
- Cross references: 12469495 / 01-490-7461 (ADAPTER, OVER‑RUNNING CLUTCH — 200/210 AMP), 12469496 / 21-921-5930 (NUT, OVER‑RUNNING CLUTCH [196901 AND ABOVE]).
-
-
-
Sold out
Save Big $$ on Roof Systems with Pickup at Our Location
Contact us at 770-262-0214
Shop
Black Dog Customs > Shop